Teaching Staff Members

Ph.D.: Industrial Engineering, University of West of Scotland, Paisley, U.K., January 1992.
M.Sc.: Production Engineering, Alexandria University, Egypt, July 1987.
B.Sc.: Production Engineering, Alexandria University, Egypt, June1981.

Academic Rank History:
• Professor of Industrial Engineering, Department of Production Engineering, Sept. 2003 – Present.
• Associate Professor, Department of Production Engineering, Sept. 98 – Aug 2003.
• Lecturer, Department of Production Engineering, April 92 – July 98.
• Assistant Lecturer, Department of Production Engineering, (April 1988 – March 1992 study leave for the Ph.D. to the University of Paisley, U.K.) Aug 87 – April 92.
• Demonstrator (Research Assistant), Department of Production Engineering, Oct 81 – July 87.

C.V.

Post Graduate Courses

Under Graduate Courses

– University of New Brunswick, Canada, Ph.D. (Mathematics), 1979
– University of New Brunswick, Canada, M.Sc. (Mathematics)1976
– University of Alexandria, B.Sc. (Mathematics), 1973
– University of Alexandria, B.Sc., (Electrical Engineering), 1970

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

ARCHITECTURE ENGINEERING

– Ph.D.: Architectural Engineering, University of Bath. England, December 1986.
– M.Sc. Architectural Engineering, University of Alexandria, Egypt, March 1980.
– B. Sc. Architectural Engineering, University of Alexandria, June 1976.

Academic Rank History :

• Emeritus Professor of Architectural Engineering, 2016 till now.
• Professor of Architectural Engineering, Department of Architectural Engineering, Sept. 2003 – 2016
• Associate Professor, Department of Production Engineering, Sept. 98 – Aug 2003.
• Lecturer, Department of Production Engineering, April 92 – July 98.
• Assistant Lecturer, Department of Production Engineering, (April 1988 – March 1992 study leave for the Ph.D. to the University of Paisley, U.K.) Aug 87 – April 92.
• Demonstrator (Research Assistant), Department of Architectural Engineering.

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

A-Gradient job :
1- Assistant Professor – The Architectural Engineering department –Faculty of Engineering – Pharos University in Alexandria from July 2007 to 7-5-2012
2- Associate Professor -The Architectural Engineering department –Faculty of Engineering – Pharos University in Alexandria from 7-5-2012 to 12-5-2017
3- Full Professor -The Architectural Engineering department –Faculty of Engineering – Pharos University in Alexandria from 13-5-2017up tile now
B-Academic Qualifications PhD:
– Building Technology- Architectural Engineering- Faculty of
Engineering -Cairo University

Master:
– Method Techniques of Construction and Management –
Architectural Engineering -–Faculty of Engineering -Alexandria
University

B.Sc:
– In Architecture (Public Buildings Division), Faculty of Engineering,
University of Alexandria, Egypt

C.V.

Post Graduate Courses

Under Graduate Courses

A Ph.D. degree in Architectural Engineering
Major: Urban Design
Thesis title:
“The Management of Public Spaces in City Centers: A Partnership Model/ the Case of Alexandria”
Department of Architectural Engineering, Faculty of Engineering, University of Cairo.

Master of Arts in Civic Design (Planning), Dept. of Civic Design, Faculty of Environmental Studies, University of Liverpool [Royal Town Planners Institute (R.T.P.I.) accredited degree].
The Master degree was a Chevening scholarship awarded by the British Council.B.Sc. Architectural Engineering, Dept. of Architecture, Faculty of Engineering, University of Alexandria (Ranking 4 th Public Buildings branch).

Membership of the following associations:
– The Association of Graduates & Trainees from Britain in Egypt (AGTBE).
– The Association of Egyptian University Women (AEUW).
– The Egyptian Engineers Syndicate.

C.V.

Post Graduate Courses

Under Graduate Courses

• Bachelor Degree in Architectural Engineering:
(Public Building), “graduated at the top of class 1999”(60 students). Faculty of Engineering, University of Alexandria – Egypt.
• Master degree in Architectural Engineering:
2002 in title of (Conservation of Heritage). Faculty of Engineering, University of Alexandria – Egypt
• PhD. in Architectural Engineering:
2010 in title of (“Museography”Architecture of Museums & Heritage Sites).
Faculty of Engineering, University of Alexandria – Egypt

C.V.

Post Graduate Courses

Under Graduate Courses

• PHD Degree in Architectural Engineering, Faculty of Engineering, Alexandria University ,2012.
• M.Sc. Degree in Architectural Engineering, Faculty of Engineering, Alexandria University ,2009.
• B.Sc. in Architectural Engineering, Faculty of Engineering Alexandria University (Third place) with the general grade: Very Good with Degree of Honour & the graduation project grade: Distinction ,2005
• High School: Institution Sainte Jeanne Antide ,2000

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Alexandria university, Faculty of Eng. , Post graduate Studies:
PHD of Architecture, June 2014 CGPA: 4 grade A
Title: Evaluation of Bio-Eco Architecture in terms of materials and construction technologies

Masters of Science, September 2010 CGPA: 3.888 grade A-
Title: Mutual Influences Of Structural And Architectural Forms.

Alexandria University, Faculty of Eng. Under graduate Studies:
Bachelor of Architecture 2008, Grade: Excellent with honor degree.
Position: 2nd on housing section, 4th on Architecture department.
Graduation project: Living Bridge at el-Dahab Island, Cairo (excellent).

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

• PHD in Architecture, Faculty of engineering, Alexandria University, 2016
• MSc in Architecture, Faculty of engineering, Alexandria University, 2011
• Bachelor of Architecture, in Architecture, Faculty of engineering, Alexandria University, 2005

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

2013-Ph.D in Architecture, Department of Architecture Faculty of Fine Arts, Alexandria University (Alexandria-Egypt)

2008-M.Sc. in Architecture and Environmental Studies Department of Architectural Engineering and Environmental Design, College of Engineering and Technology Arab Academy for Science, Technology and Maritime Transport (Alexandria-Egypt)

2004-Bachelor of Architecture, Department of Architecture, Faculty of Fine Arts, Alexandria University (Alexandria-Egypt)

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Doctor of Philosophy in architecture
Under the topic of :ARCHITECTURAL BIOMIMICRY SOLUTIONS GENERATIVE
SYSTEM: “BIO-MIM-TRIZ” (I3)

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Lecturer at Pharos university of Alexandria, faculty of engineering, architectural department. The degree of B.Sc. in Architectural Engineering from Alexandria university faculty of engineering architectural department, year 2005 (public buildings) – the degree of M.SC. in Architectural Engineering from Alexandria university faculty of engineering architectural departments, year: 2014.
The degree of Doctor of Philosophy in Architectural Engineering from Alexandria university faculty of engineering architectural departments, year:2018

Biography

Post Graduate Courses

Under Graduate Courses

Lecturer at the Architectural Department- Faculty of Engineering – Pharos University in Alexandria 2018

Assistant Lecturer at the Architectural Department- Faculty of Engineering – Pharos University in Alexandria 2018 and Demonstrator 2010-2013

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

PHD: Architectural Engineering (Regional Planning), Alexandria University, Egypt, June 2018.
M.Sc.: Architectural Engineering (Strategic Planning), Alexandria University, Egypt, January 2013.
B.Sc.: Architecture Engineering (Urban Design), Alexandria University, Egypt, June 2008.

C.V.

Alexandria university, Faculty of Engineering:
PHD of Architecture, October 2017 CGPA: 3.5
Title: energy
Alexandria university, Faculty of Finearts architecture department :
Masters of architecture, june 2011CGPA: 3.888 grade A-
Title: responsive building skin environmental efficiency ( an appraisal using digital mock-up)

Alexandria University, Faculty of fine arts , architecture department . Under graduate Studies:
Bachelor of Architecture 2005, Grade: V good with honor degree.
Position: 4th on Architecture department.
Graduation project: nuclear research center at the eastern desert (excellent).

C.V.

Google Scholar

Basic Sciences

University of New Brunswick, Canada, Ph.D. (Mathematics), 1979
University of New Brunswick, Canada, M.Sc. (Mathematics)1976
University of Alexandria, B.Sc. (Mathematics), 1973
University of Alexandria, B.Sc., (Electrical Engineering), 1970

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

University of New Brunswick, Canada, Ph.D. (Mathematics), 1979
University of New Brunswick, Canada, M.Sc. (Mathematics)1976
University of Alexandria, B.Sc. (Mathematics), 1973
University of Alexandria, B.Sc., (Electrical Engineering), 1970

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

– Ph.D. in Physico-Mathematical Sciences /1977 From Faculty of Physics, Odessa State University, Ukraine(USSR).
Specialization: Applied Mathematics (Theoretical Solid State Physics)
Thesis : Iconicity and Electronic Band Structures

– B.Sc. in Science /1973From Faculty of Science, Alexandria University.
Specialization: Physics
Grade: Very good with Second Class Honour

– B.Sc. in Electrical Engineering /1966 From Faculty of Engineering, Alexandria University.
Specialization: Electrical Engineering (Electro-Physics Branch)
Grade: Distinction with First Class Honour.

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

– Ph. D. in Engineering Mathematics:
Title : ” Sensitivity Analysis and Synchronization of Chaotic Dynamical Systems and Applications”
Department of Engineering Mathematics and Physics, Faculty of Engineering, Alexandria University, Egypt, 2005.

– M. Sc. in Engineering Mathematics:
Title: “Normal forms of nonlinear vector fields and applications” Department of Engineering Mathematics and Physics, Faculty of Engineering, Alexandria University, Alexandria (21544) Egypt, 1998.

– Diploma in Engineering Mathematics (1994):
Department of Engineering Mathematics and Physics, Faculty of Engineering, Alexandria University, Egypt, 1994.
Courses: Real Analysis, Probability and Statistics, Functional Analysis, Fluid Mechanics, Differential Geometry, Algebra and Topology.

– B. Sc., in “Electrical Engineering”, Very Good with Honor, Air Defense College, Alexandria, Egypt, 1991.

C.V.

Post Graduate Courses

Under Graduate Courses

November-2013; Ph.D Degree in physics, Faculty of Science, Alex. University.

C.V.

Post Graduate Courses

Under Graduate Courses

– Phros University, Faculty of Engineering-Architectural Dept.

– Associate Lecturer 2013-Basic Science Dept.-Assistant Professor 2016-Alexandria University, Alexandria, Egypt

– Ph.D.Architectural Engineering, June, 2016
Thesis Title:Post Occupancy Evaluation (POE) of Educational
Buildings:Psycho-Pedagogical based Approach to the Assessment of Environmental Quality in Preschools

– M.Sc., Architectural Engineering, September,2013
Thesis Title:The Assessment of Functional Quality of Buildings

C.V.

Post Graduate Courses

Under Graduate Courses

Wessam M.Salama received the B.Sc. degree in Electrical Engineering, M.Sc. and Ph.D. degrees in Electrical Engineering from Alexandria University in Egypt in 2008 , 2013 and 2018 respectively. She is currently a Teacher assistant at the Engineering Mathematics and Physics department, Pharos University. Her main research interests are in information security. She has over four publications in these fields.

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

E-mail

Mostafa received the B.Sc. degree in physics, M.Sc. and Ph.D. degrees in physics from Alexandria University in Egypt in 2008, 2013 and 2018 respectively. he is currently a Teacher basic science department, Pharos University. His main research interests are in preparation of nanomaterials. he has over four publications in these fields.

C.V.

Post Graduate Courses

Under Graduate Courses

  • PhD Degree in Physics from the Faculty of Science, Alexandria University, Egypt 2018.
  • Degree in Physics from the Faculty of Science, Alexandria University, Egypt January 2014.
  • Sc. In Physics/chemistry from the Faculty of Science, Alexandria University, Egypt May- 2008.
  • The Continuous Professional Development Course in Pedagogy, a six-module program held during the year 2012-2013 Certificate holder from the Education Development Center at Pharos university in Alexandria (PUA)

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Computer Engineering

Ph.D.: Industrial Engineering, University of West of Scotland, Paisley, U.K., January 1992.
M.Sc.: Production Engineering, Alexandria University, Egypt, July 1987.
B.Sc.: Production Engineering, Alexandria University, Egypt, June1981.

Academic Rank History:
• Professor of Industrial Engineering, Department of Production Engineering, Sept. 2003 – Present.
• Associate Professor, Department of Production Engineering, Sept. 98 – Aug 2003.
• Lecturer, Department of Production Engineering, April 92 – July 98.
• Assistant Lecturer, Department of Production Engineering, (April 1988 – March 1992 study leave for the Ph.D. to the University of Paisley, U.K.) Aug 87 – April 92.
• Demonstrator (Research Assistant), Department of Production Engineering, Oct 81 – July 87.

C.V.

Post Graduate Courses

Under Graduate Courses

– Ph.D. in Engineering, Computer Science and Automatic Control, Faculty of Engineering, Alexandria University,
Thesis: “Fast Multicast Parallel Banyan ATM Switch and a New Routing Algorithm”, July 2004.

– M.Sc. in Engineering, Computer Science and Automatic Control, Faculty of Engineering, Alexandria University.
Thesis: “Asynchronous and Mixed Mode Sequential
Machines”, July 1985.

– B.Sc. in Computer Science and Automatic Control, Faculty of Engineering, Alexandria University, with a grade of “very good with honor degree”, CGPA: 3.616/ 4.0, June 1982.

– Primary, preparatory and secondary years in a French school in Alexandria (Sainte Jeanne Antide), June 1977.

C.V.

Post Graduate Courses

Under Graduate Courses

The Ohio State University, Columbus, Ohio, June 1995

Ph.D. in Computer Engineering
Dissertation: Ana

lysis and Performance of Priority and Switching in Local Area Networks. Research Areas: Communication Networks, Distributed Systems, and High Speed Networks.
The Ohio State University, Columbus, Ohio, September 1988

M.Sc. in Computer Engineering
University of Alexandria, Egypt, January 1986

M.Sc. in Computer Science & Automatic Control
Thesis: Performance Evaluation of Disk Storage Systems.
University of Alexandria, Egypt, June 1982

B.Sc. in Computer Science & Automatic Control

C.V.

Post Graduate Courses

Under Graduate Courses

– Ph.D. in Information Technology from Alexandria University, Alexandria, Egypt.
– M.S. in Computer Engineering from Arab Academy for Science, Technology & Maritime Transport Alexandria, Egypt.
– Bachelor of Science in Electrical Engineering (Computer) from Military Technical College, Egypt.

C.V.

Post Graduate Courses

Under Graduate Courses

Construction Engineering and Management

EDUCATION:
– Hungarian Academy of Science, Sopron, Hungary. 1988

– Ph. D. in Civil Engineering under the title of: A PROPOSAL FOR MONITORING EGYPTIAN RECENT CRUSTAL MOVEMENTS -Alexandria University, Alexandria, Egypt. 1981

– M. Sc. in Civil Engineering under the title of: PERSPECITVE AND OTHER AZIMUTHAL PROJECTIONS OF THE EARTH SPHEROID -Alexandria University, Alexandria, Egypt. 1975

– B. Sc. in Civil Engineering, Honor Degree

C.V.

Post Graduate Courses

Under Graduate Courses

– Ph.D. in Civil Engineering , Highway Engineering, Faculty of Engineering, TU-Dresden, Germany(1992)
– M. Sc. in Civil Engineering, Highway Engineering , Faculty of Engineering, Alexandria University, EGYPT (1986)
– B. Sc. in Civil Engineering, Faculty of Engineering, Alexandria University, EGYPT (1980)
– 5 years as Aspirant (Dresden Germany) student for Ph.D. degree (1987-1992)

C.V.

Post Graduate Courses

Under Graduate Courses

Biography

C.V.

Post Graduate Courses

Under Graduate Courses

– Doctor of Engineering. In Engineering Transportation, 2010, Alexandria University, Egypt.
– Master of Science. In Civil Engineering, 2005, Alexandria University, Egypt.
– Diploma. In Construction Engineering, 2002, Cambridge University, London
– Diploma. In High Way Engineering, 1987, Alexandria University, Egypt
– B.Sc. in Civil Engineering, June 1985, Alexandria University, Egypt.

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

– Ph.D. in Civil Engineering & Electronics, Faculty of Engineering, Alexandria University, Egypt(2016)
– M. Sc. in Civil Engineering, Faculty of Engineering, Alexandria University, EGYPT (2008)
– B. Sc. in Civil Engineering, Faculty of Engineering, Alexandria University, EGYPT (2001)

– Ph.D. in Civil Engineering & Electronics, Faculty of Engineering, Alexandria University, Egypt(2016)
– M. Sc. in Civil Engineering, Faculty of Engineering, Alexandria University, EGYPT (2008)
– B. Sc. in Civil Engineering, Faculty of Engineering, Alexandria University, EGYPT (2001)

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Essam Eldin F. Helmy is a teacher at faculty of Engineering, Pharos University, Alexandria. He has received his Ph.D. in Applied Engineering Hydraulics from Alexandria University, Egypt; where his research deals with mathematical model for morphological changes in the sea beds due to the effects of hydrodynamic and metrological factors

Ph. D. Applied Engineering Hydraulics, July 2002. Hydraulics and Irrigation Department, Faculty of Engineering, Alexandria University

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Electrical Engineering

– July 2011, Fellowship, “International Leadership Program: Science & Education”,US Department of State, USA.
– September 2006: Ph.D. ”Biomedical Engineering: Modified Methods for Medical Image Processing, Telemedicine, and Archiving”, Electrical Engineering Department, Faculty of Engineering, Alexandria University.PhD thesis is published, VDM publications, Feb. 2010, ISBN: 978-3-639-24018-4.
– November 2000: M.Sc. “Fuzzy Logic in Robotics: An Inverse Fuzzy Genetic Algorithm for Robot Manipulators”, Electrical Engineering Department, Facultyof Engineering, Alexandria University

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Academic Qualifications:
1- B.Sc. with general grade as Distinction with Degree of Honor (Rank: 1st), June 1973, in Faculty of Engineering, Alexandria University, Egypt. Specialization: Electrical Power Engineering.
2- M.Sc. degree, August 1976, in Faculty of Engineering, Alexandria University, Egypt. Specialization: Power System Analysis. Thesis title: “Methods of Solution of Large Scale Power Systems Problems on Digital Computers”.
3- Ph.D. (Doctor of Engineering), March 1983, in Division of Engineering, Graduate School, Tohoku University, Japan. Specialization: Power System Stability & Control. Thesis Title: “Optimal Decentralized Control & Stabilization of Interconnected Power Systems”

C.V.

Post Graduate Courses

Under Graduate Courses

– B.Sc., Electrical Engineering, Faculty of Engineering, Alexandria University.
– M.Sc., Electronics and Communications Engineering, AAST
– PhD, Electrical and Computer Engineering, Concordia University, Canada.

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

– Doctor of Philosophy in Electrical Engineering, may 2007.
– Master of Science in Electrical Engineering, April 2000.
– B.Sc. in Electrical Engineering, June 1983.
– B.Sc. in Science, August 1982.

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

B.Sc. M.Sc. Ph.D. Electrical Engineering Department. Alexandria University. 1985 – June 1990

C.V.

Post Graduate Courses

Under Graduate Courses

– PhD, 2014, Alexandria university
– MSc, 2009, Alexandria University
– BSc, 2003, Alexandria University

C.V.

Post Graduate Courses

Under Graduate Courses

– August 2000
Bachelor of Electronics & Communication Engineering
Arab Academy for Science & Technology – Alexandria,
Faculty of Engineering & Technology, Electronics and Communication Engineering Department
Cumulative Grade Point Average (G.P.A.): (3.68/4.00) “Excellent With Honor”
Grade: The seventh order.
Graduation Project Grade: Excellent.

– April 2004
The Master Degree in Electronics & Communication Engineering
Arab Academy for Science & Technology & Maritime Transport,
Grade: “Excellent”

– April 2014
The PhD Degree in Electronics & Communication Engineering,
Faculty of Engineering – Alexandria University.

C.V.

Post Graduate Courses

Under Graduate Courses

Academic degrees:
• November 2014: PhD, Electrical and Computer Engineering, Concordia University, Montréal, Canada.
Thesis topic: “Design of Novel Variable Flux Permanent Magnet Machine for Electric Vehicles”

• September 2011: MA.Sc, Electrical and Computer Engineering, Concordia University, Montréal, Canada
Thesis topic: “Modeling of Core Losses in Electrical Machine Laminations Exposed to High Frequency and Non-sinusoidal Flux”

• 2008: B.Sc, Electrical Engineering, Power and Machines Section, Alexandria University, Egypt

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

– Heba Raafat is currently teacher at the department of electrical in pharos university. I was working in pharos university from 2006 till now.
– I am graduated from Alexandria university faculty of engineering in 2006. I obtained my master from Alexandria university in 2011. I obtained my PHD from Alexandria university in 2016.

C.V.

Post Graduate Courses

Under Graduate Courses

– PHD in Wireless sensor networks security (Faculty of Engineering, Alexandria University, 2017).
– Msc of Science in wireless sensor networks (Faculty of Engineering, Alexandria University, 2011).
– B.sc (Faculty of Engineering, Alexandria University, 2006).

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Mechanical Engineering

EDUCATION:
– B.Sc. 1969 Mechanical Engineering, Alexandria University, Egypt
– Ph.D. 1975 Mechanical Eng., Paisley University, Scotland, U.K.

ACADEMIC RECORD:
– Demonstrator 1970– 1971
– Assistant Professor 1975—1980
– Associate Professor 1980—1987
– Professor 1987— Now
– OTHER RELATED EXPERIENCE: TEACHING, INDUSTRIAL, ETC.
– Visiting Professor 1981—1982 Imperial College, London University, U.K
– Part time Consultant 1984—1998 Mechanical Services in Building, Projects Dept.,King Abdulaziz City of Science and Tech. (KACST)
– Technical Committee Head, Saudi Mechanical Code, 2003—2011, Saudi Building Code.
– Head of Dept., Engineering College, Pharos University, Alexandria, Egypt, 2013─ now

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

– B. Sc. In Mechanical Engineering, Alexandria University, Egypt, 1973.
– M. Sc. In Mechanical Engineering, Alexandria University, Egypt, 1979.
– Ph. D. in Mechanical Engineering, Vienna University of Engineering, Vienna, Austria, 1984.

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Biography

Post Graduate Courses

Under Graduate Courses

– Ph.D., 2016
– M.Sc., 2007
– B.Sc., 2001

C.V.

Post Graduate Courses

Under Graduate Courses

– Lecturer at Pharos University, Faculty of Engineering, Mechanical department since 4-9-2017 until now.
Assistant lecturer, at the Collage of Maritime Transport & Technology (CMTT), Arab Academy for Science, Technology and Maritime Transport “AASTMT” since 2010 until 2016, teaching courses of fluid mechanics.

– Assistant lecturer at the Arab Academy for Science, Technology and Maritime Transport “AAST”, Faculty of Engineering at the Mechanical department, teaching courses of engineering drawing, descriptive geometry, thermos dynamics and fluid mechanics.

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Alexandria University – Faculty of Engineering

– Doctor of Philosophy (Ph.D.) Degree in Production Engineering (2009 – 2017) Ph.D. Thesis
Thesis Title: Prediction of Bearing Remaining Useful Life Based on Euclidean Distance using Artificial Neural Network
Supervisor: Prof. Dr. Mohammed A. Younes, and Dr. Elsayed S. Elsayed.

– Master of Science (M.Sc.) Degree in Production Engineering (2003 – 2008) M.Sc. Thesis
Thesis Title: Applying SDL in TQM
Supervisor: Prof. Dr. Mohammed Dardiry

– Bachelor of Science (B.Sc.) Degree in Production Engineering (1998 – 2003)

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Petrochemical Engineering

Biography

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

– Ph.D. (1980) School of Engineering, Case Western Reserve University, Macromolecular Science.
– M.S. (1974) Chemical Engineering (Polymeric Materials) Polytechnic Institute of New York.
– B.S. (1964) Chemistry and Geology, Alexandria University, Egypt.

C.V.

Post Graduate Courses

Under Graduate Courses

– Ph.D. in Chemical Engineering, Faculty of Engineering, Alexandria University, July 2010.
Title of Research” Treatment of Petrochemical Waste Water Containing Phenolic Compounds Using Electrochemical Technique”.
– Ms c. in Chemical Engineering, Faculty of Engineering, Alexandria University, December, 2005.
Title of Research “A Study on the Performance and modeling of a Small Sized Experimental Batch Solar Distillation Unit”
– Bachelor degree of Chemical Engineering Department, Faculty of Engineering, Alexandria University, June 1999.

C.V.

Post Graduate Courses

Under Graduate Courses

1- B. Sc. Chemical Engineering, (1993-1998),
General Grade: Very Good with Honor, Faculty of Engineering, University of Alexandria , Egypt
2- Diploma of Environmental Engineering, (1999)
General Grade: Excellent, Environmental Engineering Department, High Institute of Public Health , University of Alexandria, Egypt.
3- Master of Environmental Engineering, (2006)
General Grade: Excellent, Environmental Engineering Department, High Institute of Public Health, University of Alexandria. Egypt.
4- Doctor in Environmental Engineering (2010), Environmental Engineering Department, High Institute of Public Health, University of Alexandria.

C.V.

Post Graduate Courses

Under Graduate Courses

– Doctor of Philosophy in Chemical Engineering in “Development of a mathematical model for a fluidized bed reaction vessel”, 2011.

– Master of Science in Chemical Engineering in “Biosorption of Cu (II) ions from aqueous solutions by treated shells of some crustaceans”, 2007.

– B.Sc. in Chemical Engineering, Alexandria University, June 2002.

C.V.

Post Graduate Courses

Under Graduate Courses

EDUCATION:
2009-2012: PhD in Chemical engineering, Faculty of Engineering, Alexandria University, Alexandria, Egypt.
2007-2009: MS.c in Chemical engineering, Faculty of Engineering, Alexandria University, Alexandria, Egypt.
1993-1998: BS.c in Chemical engineering, Faculty of Engineering, Alexandria University, Alexandria, Egypt.

C.V.

Post Graduate Courses

Under Graduate Courses

– Noha Yousef, Rania Farouq, Riham Hazzaa, ” Adsorption kinetics and isotherms for the removal of nickel ions from aqueous solutions by an ion- exchange resin: Application of two and three parameter isotherm models “,Desalination and Water Treatment, December 2015

– Hassan A. Farag, N. S. Yousef, and Rania Farouq “modeling and simulation of a hydrocracking unit” Journal of Engineering Science & Technology (JESTEC). Volume 11, Issue 8 (August 2016).

– Abdelrhman A.Yacoub, Rania Farouq, Hassan A.Farag “Modeling, simulation and optimization Of Dehydrogenation and Dehydrocyclization Reactions” International Journal of Chemical Engineering Research (SSRG-IJCER) volume 2 Issue2 July to Aug 2015.

– R. Abu-Elella, M.E. Ossman,R. Farouq M. Abd-Elfatah, Used Motor Oil Treatment: Turning Waste Oil Into Valuable Products, IJCBS, 7(2015):57-67

– Rania Farouq, N.S. Yousef, Equilibrium and Kinetics Studies of adsorption of Copper (II) ions on Natural Biosorbent, International Journal of Chemical Engineering and Applications (IJCEA, ISSN:2010-0221)

– N.S. Yousef, Riham Hazzaa, Rania Farouq, Adsorptive Removal of Chromium (III) from aqueous solution using Cation-Exchange Resin: Development of an Empirical Model, IPCBEE, ISSN: 2010-4618

C.V.

Post Graduate Courses

Under Graduate Courses

– B.Sc. of Science, Alexandria University
Egypt 1967

– M.Sc. of Science, Alexandria University
Egypt 1975
Postgraduate Studies, Petroleum Processing

M.Sc. of Chemical EngineeringOklahoma State University , School of Chem.Eng.

Washington International University USA 1977

1998

– Ph.D. of Science, Petrochemical applications Alexandria University
Egypt 1988

C.V.

Post Graduate Courses

Under Graduate Courses

Google Scholar

Why did you go to PUA for student exchange?

The chance to visit Africa, and more specific an Arab country with so much history as Egypt has, made the decision very easy. PUA offered the necessities and quality needed for my bachelor thesis to be conducted.

How long was the exchange period?

The exchange lasted 8 weeks in total.

How have you been chosen for the exchange?

Prof. Andrew Martin from KTH scouted for students to participate in a collaboration with PUA and KTH, me and my colleagues applied and were accepted.

What do you think are the differences between studying at PUA and KTH?

The difference is a more direct contact or line of communication in PUA compared to KTH. The relationships between pupils and professors are more personal than in KTH. Moreover, the learning is more of a practical character in PUA than in KTH, where the approach is often more theoretical and is conducted to bring discussion.

Did PUA staff, professors, researcher and others that you met been helpful and easy to communicate, discuss and cooperate

They have been excellent in supporting all causes, the communication line is very clear and everyone, including students, are very generous and show great hospitality. Our Egyptian colleagues, whom we collaborate with, have excellent knowledge in their field and are easy to discuss with.

Read More

Why did you go to (KTH Royal Institute of Technology) for staff exchange?

The main objectives of this mobility are:
- Explore the master program in Electrical Engineering in KTH.
- Investigate the availability of joint undergraduate projects submission.
- Acquire new teaching and learning skills from KTH.
- Reinforcement the cooperation between KTH and PUA.

How long was the exchange period?

A month.

How have you been chosen to this visit?

Through a presentation in front of the vice president and the international relations coordinator of PUA University. The presentation includes my goals to this grant of the Erasmus+ staff mobility program and this is done after the submission of the motivation letter and my CV to them.

Read More

Why did you go to the School of Pharmacy, University of Eastern Finland for staff exchange?

I consider the visit to the School of Pharmacy, UEF, as a lifetime experience that I believe it is a milestone in my career. It is a significant opportunity to discover innovative and different teaching and research techniques as well as to explore new foreign culture that is definitely motivational and very inspirational to my career

How long was the exchange period?

The exchange period was 8 days

How have you been chosen to this visit?

The journey started after my motivation letter was selected by Prof. Dr. Maged ElGhazouly, Dean of the Faculty of Pharmacy and Drug Manufacturing. I was one of 5 lecturers who were chosen to present their motivations to contribute in such exchange program in front of Prof. Dr. Mahmoud Mohey ElDin, President of Pharos University in Alexandria and Prof. Dr. Nourhan Fanaky, Vice President for Education and Students Affairs.

How do studies and researches at School of Pharmacy, University of Eastern Finland differ in comparison to your previous experience?

I think they are different in the time and resources available for their research. In addition, most of them are working as a multidisciplinary team which collaborate together for successful publications

Read More

Why did you go to KTH for staff exchange?

To gain more experience about teaching methods, to get introduced to a new culture, to widen my professional network, to know more about the curriculum of the courses in the KTH and compare it to ours in PUA. My main mission was about the BIM courses to transfer the way of teaching and to know all the courses that are taught in the KTH as PUA is starting to teach this new technology.

How long was the exchange period?

It was one month.

How have you been chosen to this visit?

I have been chosen through a process that started by a call to all the staff members for whoever wants to submit a motivation letter to be chosen. Then there was an interview with the faculty of engineering dean and head of departments. Then there was an interview with the head of international relations and the representatives of university’s president.

How do studies and researches at KTH differ in comparison to your previous experience?

It differs a lot as the number of years for the university education at the KTH are 3 for bachelor degree and most of the students there continue post graduate studies for 2 years to complete their master’s degree. One of the great differences is that all the master or PhD thesis are concerned with the industry to solve problems or to renovate the technology of construction.

Read More

Why did you go to (Royal Institue of Technology KTH) for staff exchange?

My trip was part of a grant of the Erasmus+ Staff Mobility Program. The main purpose of the trip was to adopt new teaching methods, interactive learning methods and assessment methods. In addition, visit the laboratories and workshops. Another personal purpose was to network with people interested in the field of my PhD research and exchange knowledge with them.

How long was the exchange period?

The exchange period was for 10 days.

How have you been chosen to this visit?

I applied for it at the PUA. The application included a motivation letter, my CV and a valid IELTS certificate. Then I have done a presentation on the purpose of my application to this visit. The attendees of the presentation were the Vice President of the PUA and the International Relations Coordinator at the PUA.

Read More

Why did you go to (KTH)for staff exchange?

I went there as a part of ICM program among the agreement between KTH and PUA

How long was the exchange period?

10 days

How do studies and researches at (KTH) differ in comparison to your previous experience?

There educaltional system consists of 3-years program BSc and 2 years Msc. The computer and electrical engineering are merged in one schoo;

Did (KTH) staff, professors, researcher and others that you met been helpful and easy to communicate, discuss and cooperate

Yes,

Could you describe a regular day as a student or teacher at (KTH)?

Student : attend lectures and lab sessions Teacher : give lectures, participate in meetings related to research projects

What was the best part of your experience at (KTH)?

Meeting with master programs directors and advanced abs

Read More

What made you chose PUA to study?

Being best authentic private university in Alexandria with highly qualified cooperative Teaching staff from professors to demonstrators is reason enough for anyone to join your University.

Why did you go to (University of Eastern Finland) for student exchange?

In my opinion, the university announced for scholarship was a great opportunity to discover their teaching methods and facilities whilst still student in PUA, as well as experience first-hand the European scandanavian culture.

How long was the exchange period?

About four months since 3rd/sept/2018 to 20th/dec/2018

How have you been chosen for the exchange?

By assessing applicant English proficiency, recommendation letter from my professors, motivation letter and interviews was also done to assess student social and academic background as well as their overall character.

Read More

What made you chose PUA to study?

I choose Pharos University because it is one of the top 10 universities in the Republic of Egypt and its close relationship between other international universities, especially the Royal Institute of Technology (KTH)

Why did you go to (KTH) for student exchange?

To gain experience of travel without parents and self-reliance and to see the cultures of other countries

How long was the exchange period?

It was 3 months

How have you been chosen for the exchange?

I think because I worked hard to study architecture and got the highest grades and excelled at the University of Pharos

Read More

What made you chose PUA to study?

Because of the excellent educational level offered by pharos university.

Why did you go to (KTH) for student exchange?

To gain a new experience and knew the difference between education in Egypt and abroad.

How long was the exchange period?

3 months

How have you been chosen for the exchange?

I was nominated by my department then I have passed the language test and an interview with university administration.

What do you think are the differences between studying at PUA and (KTH)?

The biggest difference is that students there depend on themselves a lot in the education.

Read More

What made you chose PUA to study?

I choose Pharos University to study because I knew about the agreement dual bachelor degree from both KTH and PUA which gives international exposure. Also its one of the best University for the education perspectives.

Why did you go to KTH for student exchange?

To gain experience, knowledge. Also to explore different cultures and know the least technology and trend in architecture.

How long was the exchange period?

3 months

How have you been chosen for the exchange?

First I have been writing my CV and motivation letter. Second I have been through 2 interviews and English test.

Read More

What made you chose PUA to study? 

 I choose Pharos University to study because it is one of the universities that help on producing good generations.

 Why did you go to (KTH) for student exchange?

To gain experience and knowledge from other countries that could help me in my future sake concerning the Architecture Engineering. 

How long was the exchange period? 

3 months 

How have you been chosen for the exchange? 

 By owning high grades, good communication skills and language.

Read More

Why did you go to PUA for student exchange? 

  I heard about the transportation project from my teacher at KTH. I chose PUA for exhange to write my bachelor thesis.

How long was the exchange period?  

3 months. 

 How have you been chosen for the exchange?

By my teacher at KTH. 

What do you think are the differences between studying at PUA and (KTH)? 

  I have nit participated in any courses but otherwise, there are differences such as school rules, computer lab.

Did PUA staff, professors, researcher and others that you met been helpful and easy to communicate, discuss and cooperate.  

Yes, they have been helpful all the period and it was easy to communicate with them.  

Read More

What made you chose PUA to study?

Because it is one of best universities in Alexandria.

Why did you go to KTH Royal Institute of Technology in Stockholm for student exchange?

It was a good chance to gain experience.

How long was the exchange period?

Three months.

How have you been chosen for the exchange?

I have been chosen by my professors.

What do you think are the differences between studying at PUA and KTH Royal Institute of Technology in Stockholm?

The students at KTH is more independent.

Read More

What made you chose PUA to study?

As Pharos is one from the best universities in Egypt, it was recommended for me.

Why did you go to (KTH) for student exchange?

It was the best chance ever to learn a lot about everything, their way of studying, their work during their lectures and tutorial.

How long was the exchange period?

It was for 3 months.

How have you been chosen for the exchange?

I was able to get the highest grades so that I could get my professors' nomination and I worked hard on it

Read More